Zebra Stripe Technical Information download pdf (Page 80)

CAUTION: Turn the printer’s AC Power Switch OFF and disconnect the

printer’s AC Power Cable before replacing the Fuse.

A User replaceable AC Power Fuse is located just to the left of the Power

ON/OFF Switch. For a 110 VAC installation, the replacement Fuse is a 3AG Fast

Blow style rated at 5 Amp/250VAC. For a 220 VAC installation, the Fuse is the

same style but rated at 3 Amp/250VAC.

To replace the Fuse, follow the CAUTION above, then insert the tip of a

flatblade screwdriver into the slot designed into the Fuse Holder’s End Cap.

Press in slightly on the End Cap and turn the screwdriver slightly to the left.

This will disengage the End Cap from the Fuse Holder and permit removal of the

Fuse. To install a new Fuse, reverse the sequence.

44868L Page 5-41

1 2 ... 75 76 77 78 79 80 81 82 83 84 85 ... 118 119

No comments

Zebra Stripe Technical Information Page 80