Zebra Stripe Technical Information Page 16

  • Download
  • Add to my manuals
  • Print
  • Page
    / 119
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 15
printed will be canceled. If there are no formats in the printer, the CANCEL Key
is ignored. If the CANCEL Key is pressed for an extended period of time
(3 seconds), the printer will perform a “Cancel All Formats” operation.
The MODE Key causes the printer to enter the Configuration Mode. In this
Mode, the Print Darkness, Media Tear-off Position, and Label Top Position
settings can be adjusted.
The Media Calibration procedure is also activated by the MODE key.
Refer to the user’s guide for details on the Configuration Mode and the Media
Calibration procedures.
Refer to Figure 2.3 for the location of the lights.
NOTE: If an operating condition which causes a light to be ON constantly and one
which causes the same light to Flash occur at the same time, the light will Flash.
POWER ON Printer is ON. The AC Power ON/OFF Switch is in the
ON position and the power cord is connected.
PRINTHEAD OFF Normal operation.
ON Head Over Temperature condition. Printing stops until
the printhead cools down. Printing resumes
automatically.
Printhead Under Temperature condition. Printing
continues.
Flashing Printhead Open.
PAPER/
RIBBON
OFF Media and ribbon (if used) are properly loaded.
ON Paper out.
Flashing 1. In Thermal Transfer Mode: Ribbon is out.
2. In Direct Thermal Mode: Ribbon is in printer.
3. Backing Rewind Spindle is full.
PAUSE OFF Normal operation.
ON Printer has stopped all printing operations.
DATA OFF Idle, no data being received.
ON Labels are printing.
Single
flash
The CANCEL key was pressed and a format was
successfully deleted from the print queue.
Flashing Receiving data from host computer.
Slow
flashing
Printer sent a “stop transmitting data” (X-OFF)
command to the host computer.
DARKEN ON Printer is in the Configuration Mode. See the Mode
Key operation for more information.
POSITION ON
CALIBRATE ON
44868L Page 2-9
Page view 15
1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 118 119

Comments to this Manuals

No comments