Zebra Stripe Technical Information download pdf (Page 91)

If you encounter any problem which cannot be corrected with the aid of this

manual, contact Technical Support immediately to minimize or avoid printer

downtime. Technical Support can also assist in determining if the printer should be

returned for repair.

Contact Zebra Technical Support:

Should it become necessary to ship your printer, carefully pack the printer in a

suitable container to avoid damage during transit. You must enclose a note

describing the failure in as much detail as possible. Whenever possible, use the

original shipping container. If other containers are used, a procedure similar to

the original factory packaging should be followed

Enclose the unit in a protective, dust-proof bag and ensure that the unit floats in

an outer carton of shock-absorbing material.

A Return Materials Authorization (RMA) number is required for all equipment

being returned. Contact Zebra Technologies Corporation’s Technical support to

obtain an RMA number. Equipment returned for service without prior

authorization may be refused.

CAUTION

Remove any ribbon and paper rolls from the Media Compartment,

otherwise damage to the printer could result.

DO NOT package the printer in a rigid container without utilizing

shockmounts or shock-absorbing packing material. A rigid container may

cause damage to the printer by allowing shock on the outside to be

transmitted undamped to the unit.

Technical Support

333 Corporate Woods Parkway

Vernon Hills, Illinois 60061-3109

Phone: (708) 913-2259

after Jan. 1996: (847) 913-2259

Fax: (708) 913-2578

after Jan. 1996: (847) 913-2578

Zebra House, The Valley Centre,

Gordon Road, High Wycombe

Buckinghamshire HP13 6EQ, UK

Phone Number: +44 (0) 1494 472872

Telefax Number: +44 (0) 1494 450103

Page 6-10 44868L

1 2 ... 86 87 88 89 90 91 92 93 94 95 96 ... 118 119

No comments

Zebra Stripe Technical Information Page 91