Zebra Stripe Technical Information download pdf (Page 24)

PAUSE Key Loopback Test

This test demonstrates the media movement capabilities of the printer and

provides a test printout to view while making print quality adjustments.

With the Loopback Connector in place, press the PAUSE Key while turning the

AC Power Switch ON.

After the Power On Self Test, the printer will print 500 Head Test labels. Each

label will backfeed prior to printing and feed to the rest position after printing.

A serialized number will print on each label for comparison purposes. See

printout example in Figure 3.6.

The PAUSE Key can be used to stop and restart the printing operation.

FEED Key Loopback Test

With the Loopback Connector in place, press the FEED Key while turning the

AC Power Switch ON.

After the POST, the printer will begin printing a series of formats as shown in

the following chart. The printer pauses at the end of each printed format. Press

the PAUSE Key to begin printing the next format. Refer to the printout examples

in Figures 3.7 through 3.13.

The PAUSE Key can be used to stop and restart the printing operation. When

the printer is in PAUSE, the CANCEL Key can be used to move to the next

format.

The S-300 will only perform this test at speed “A” (2" per second).

Figure 3.6 PAUSE Key Loopback Test Printout

Stripe Maintenance Manual: Volume 1 Printer Diagnostics

44868L Page 3-7

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 118 119

No comments

Zebra Stripe Technical Information Page 24