32056L Rev. 2 12/4/01 105SL Maintenance Manual Page 2-43
OPERATION OVERVIEW SECTION 2
Press the right oval key to increase the value, or press the left oval key to decrease the
value. Each positive number moves the label top position down by one dot row; each
negative number moves the position up by one dot row.
Default: +0
Range: –120 to +120
Press the NEXT key to display LEFT POSITION.
6HWWLQJWKH/HIW3RVLWLRQ
The left position controls the initial print position from the left edge of a label (view as the
label exits the printer). The reference default position is to the left edge of the media. Refer
to Figure 2-30. Depending on the width of the media, the label format may begin printing on
the backing material or on the platen. To set the position where the format begins printing,
change the left position value.
Press (–) to move the cursor to the next digit, and press the (+) to change the +/– value and
increase the value of the digit (“+” shifts to the left, “–” shifts to the right). The displayed value
represents the number of dot positions the format shifts right or left.
Figure 2-29. Label Top Position
/()7326,7,21
→±
FEED
LABEL
LENGTH
LABEL
LENGTH
LABEL TOP
POSITION
LABEL TOP
POSITION
80 DOT ROWS
Comments to this Manuals