Zebra 105SL Specifications Page 35

  • Download
  • Add to my manuals
  • Print
  • Page
    / 246
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 34
32056L Rev. 2 12/4/01 105SL Maintenance Manual Page 2-13
OPERATION OVERVIEW SECTION 2
/2$',1*0(',$
Figure 2-13 provides a view of the printer with the media cover open. Become familiar with
these components before loading the media or ribbon.
NOTE: A calibration must be performed when media and ribbon (if used) are first
installed in the printer, when a different type of media or ribbon is being
used, or if printer is set to “feed” or “no motion” at power up or head
close.
7HDU2II0RGH
Refer to Figure 2-14.
1. Open the printhead.
2. Slide the media guide and media supply guide as far from the printer frame as possible.
3. Load media as shown.
4. Slide in the media guide and media supply guide so they just touch, but don’t restrict,
the edge of the roll.
5. Close the printhead.
Figure 2-13. Printer Media Side Parts
Printhead
Lever
Spindle Hook
Ribbon supply
Spindle
Ribbon Take-up
Spindle
Media
Supply
Guide
Media
Supply
Hanger
Media
Rewind
Spindle
Spindle
Hook
Tear-off/
Peel-off
Bar
Media
Roller
Snap
Plate
Platen
Roller
Lower
Roller
Media Guide
Printhead
Page view 34
1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 245 246

Comments to this Manuals

No comments