Zebra 105SL Specifications download pdf (Page 24)

Page 2-2 105SL Maintenance Manual 32056L Rev. 2 12/4/01

SECTION 2 OPERATION OVERVIEW

)URQW3DQHO.H\V

For an explanation of the front panel controls, refer to the following table and to Figure 2-1.

Table 2-1. Front Panel Keys

Key Function

Starts and stops the printing process.

• If the printer is not printing: no printing can occur.

• If the printer is printing: printing stops once the current label is complete.

Press to remove error messages from the display.

NOTE: Pause mode can also be activated via ZPL II (~PP, ^PP).

Forces the printer to feed one blank label each time the key is pressed.

• Printer not printing: one blank label immediately feeds.

• Printing: one blank label feeds after the current batch of labels is complete.

When in the pause mode, this key cancels print jobs.

• Print job in queue: press once for each print job to be deleted.

• Press and hold for several seconds to cancel all print jobs in the printer’s memory. The

DATA light turns off.

NOTE: The keys below are used only when configuring the printer. Specific uses of these keys are explained

in the Configuration section of the User's Guide, PN 32051L.

• Scrolls back to the previous menu item.

• Press and hold to quickly go backward through parameter sets.

• Scrolls forward to the next menu item. Saves any changes you’ve made in the

configuration and calibration sequence.

• Press and hold to quickly advance through parameter sets.

Enters and exits the configuration mode.

These keys change the parameter values. They are used in different ways depending on the

parameter displayed. Common uses are: to increase/decrease a value, answer “yes” or “no,”

indicate “on” or “off,” scroll through several choices, input the password, or set up the printer

for a firmware download.

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 245 246

No comments

Zebra 105SL Specifications Page 24