32056L Rev. 2 12/4/01 105SL Maintenance Manual Page 1-5
DESCRIPTION OF EQUIPMENT SECTION 1
63(&,),&$7,216
The following tables provide specifications for the printer, media, and ribbon. Using media or ribbon not
designed for the printer can cause unsatisfactory results.
Table 1-3. General Specifications
Printer Physical Characteristics 105SL (203 dpi) 105SL (300 dpi)
Height 15.5
″ 394 mm 15.5″ 394 mm
Width 11.2
″ 284 mm 11.2″ 284 mm
Depth 18.9
″ 480 mm 18.9″ 480 mm
Weight (without options) 55 lbs. 25 kg 55 lbs. 25 kg
Table 1-4. Printing Specifications
Printing Specifications 105SL (203 dpi) 105SL (300 dpi)
Resolution 203 dots/inch(8 dots/mm) 300 dots/inch (12 dots/mm)
Dot size (width x length)
0.0049
″ x 0.0049″
(0.125 x 0.125 mm)
0.0033
″ x 0.0039″
(0.084 mm x 0.100 mm)
First dot location measured from inside
media edge
0.10
″ ±0.035″
(2.5 mm ±0.89 mm)
0.10
″ ±0.035″
(2.5 mm ±0.89 mm)
Maximum print width 4.09
″ (104 mm) 4.09″ (104 mm)
Print Length
(maximum)
Non-continuous
printing
Standard
memory
39
″ (991 mm) 39″ (991 mm)
Continuous
printing
Standard
memory
106
″ (2692 mm) 65″ (1651 mm)
Bar code
modulus
(“X”)
dimension
Ladder (rotated) orientation 4.9 mil to 49 mil 3.9 mil to 39 mil
Picket fence (non-rotated)
orientation
4.9 mil to 49 mil 3.3 mil to 33 mil
Thin film printhead with Element Energy
Equalizer
®
(E
3
)
Yes Yes
Table 1-5. Ribbon Specifications
Ribbon width: To protect the printhead from wear, Zebra
recommends using ribbon at least as wide as the media
you are using.
Maximum 4.5″ 114 mm
Minimum 0.79
″ 20 mm
Standard lengths
2:1 media to ribbon roll ratio 984’ 300 m
3:1 media to ribbon roll ratio 1476’ 450 m
Roll size
Inner diameter of core 1.0
″ 25.4 mm
Outside diameter of full ribbon roll 3.2
″ 81.3 mm
Comments to this Manuals