Zebra 105SL Specifications download pdf (Page 154)

Page 4-68 105SL Maintenance Manual 32056L Rev. 2 12/4/01

SECTION 4 PREVENTIVE AND CORRECTIVE MAINTENANCE

7. Refer to Figure 4-51. Remove the screw attaching the upper media sensor to the

bracket. Set aside the bracket.

NOTE: A small screwdriver may be used to take pressure off the locking tabs that

grip the PCB.

8. Refer to Figure 4-52. Slide the lower media sensor away from the printer main frame so

you can get at it. Carefully pry apart the sides of the bracket holding the sensor PCB.

The sensor PCB should fall free and dangle from its electrical leads.

9. Refer to Figure 4-4 or Figure 4-5. Locate the electrical leads from the two sensors.

Open the reusable wire ties and white plastic clamps and follow sensor electrical leads

to main logic board connectors.

Figure 4-50. Linen Thread Placement

Figure 4-51. Upper Media Sensor and Bracket

Linen Thread

Phillips Head Screw

Washer

Linen Thread

Sensor Wire

Cover

Upper Media

Sensor

Red & Brown

Connectors

Red & Black

Grommet

Lower Media

Sensor

Upper Media

Sensor Bracket

1 2 ... 149 150 151 152 153 154 155 156 157 158 159 ... 245 246

No comments

Zebra 105SL Specifications Page 154