Zebra XiIII Series User Manual download pdf (Page 53)

Zebra XiIII-Series User’s Guide 45

Press Display Shows Action/Explanation

MEDIA TYPE

Setting Media Type: Press the RIGHT or LEFT BLACK OVAL

key to display other choices.

Default: Continuous

Selections: Continuous, non-continuous

This parameter tells the printer the type of media you are using.

Selecting continuous media requires that you include a label

length instruction in your label format (^LLxxxx if you are using

ZPL or ZPL II).

When non-continuous media is selected, the printer feeds media

to calculate label length (the distance between two recognized

registration points of the inter-label gap, webbing, or alignment

notch or hole).

SENSOR TYPE

Setting the Sensor Type: Press the RIGHT or LEFT BLACK

OVAL key to display other choices.

Default: Web

Selections: Web, mark

This parameter tells the printer whether you are using media with

a web (gap/space between labels, notch, or hole) to indicate the

separations between labels or if you are using media with a black

mark printed on the back. If your media does not have black

marks for registration on the back, leave your printer at the default

(web).

PRINT METHOD

Selecting Print Method: Press the RIGHT BLACK OVAL key for

the next value; press the LEFT BLACK OVAL key for the previous

value.

Default: Thermal transfer

Selections: Thermal transfer, direct thermal

The print method parameter tells the printer the method of printing

you wish to use: direct thermal (no ribbon) or thermal transfer

(using thermal transfer media and ribbon).

NOTE: Selecting direct thermal when using thermal transfer

media and ribbon creates a warning condition, but

printing continues.

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 115 116

No comments

Zebra XiIII Series User Manual Page 53