Zebra XiIII Series User Manual download pdf (Page 60)

52 Zebra XiIII-Series User’s Guide

Press Display Shows Action/Explanation

PARITY

Setting Parity: Press the RIGHT or LEFT BLACK OVAL key to

display other choices.

Default: Even

Selections: Even, odd, none

The parity of the printer must match the parity of the host

computer for accurate communications to take place. Select the

parity that matches the one being used by the host computer.

STOP BITS

Setting Stop Bits: Press the RIGHT or LEFT BLACK OVAL key

to display other choices.

Default: 1 stop bit

Selections: 1 stop bit, 2 stop bits

The stop bits of the printer must match the stop bits of the host

computer for accurate communications to take place. Select the

stop bits that match the one being used by the host computer.

HOST HANDSHAKE

Setting Host Handshake: Press the RIGHT or LEFT BLACK

OVAL key to display other choices.

Default: XON/XOFF

Selections: XON/XOFF, DTR/DSR

The handshake protocol of the printer must match the handshake

protocol of the host computer for proper communications to take

place. Select the handshake protocol that matches the one being

used by the host computer.

PROTOCOL

Setting Protocol: Press the RIGHT or LEFT BLACK OVAL key

to display other choices.

Default: None

Selections: None, Zebra, ACK/NACK

Protocol is a type of error checking system. Depending on the

selection, an indicator may be sent from the printer to the host

computer signifying that data has been received. Select the

protocol that is requested by the host computer. Further details

on protocol can be found in the ZPL II Programming Guide.

NOTE: Zebra is the same as ACK/NACK except that with Zebra

the response messages are sequenced.

If Zebra is selected, printer must use “DTR/DSR” host

handshake protocol.

1 2 ... 55 56 57 58 59 60 61 62 63 64 65 ... 115 116

No comments

Zebra XiIII Series User Manual Page 60