Zebra XiIII Series User Manual download pdf (Page 92)

84 Zebra XiIII-Series User’s Guide

FEED Key Self Test

See Figure 35.

1. Turn off the printer.

2. Press and hold the FEED key

while turning on the power.

The FEED key self test prints out at

various darkness settings above and

below that of the darkness value

shown on the configuration label.

Look at these labels and determine

which one has the best darkness

setting for your application. This

value can be entered into the printer

by setting the darkness during the

configuration procedure. Refer to

page 44 for more information.

Figure 35

The value printed on that label is added to (plus) or subtracted from

(minus) the darkness value specified on the configuration label. The

resulting numeric value (0 to 30) is the best darkness value for that specific

media/ribbon combination.

1 2 ... 87 88 89 90 91 92 93 94 95 96 97 ... 115 116

No comments

Zebra XiIII Series User Manual Page 92