Zebra XiIII Series User Manual download pdf (Page 63)

Zebra XiIII-Series User’s Guide 55

Selecting ZPL Mode

Press Display Shows Action/Explanation

ZPL MODE

Selecting ZPL Mode: Press the RIGHT or LEFT BLACK OVAL

key to display other choices.

Default: ZPL II

Selections: ZPL II, ZPL

The printer remains in the selected mode until it is changed by

this front panel instruction or by using a ZPL/ZPL II command.

The printer accepts label formats written in either ZPL or ZPL II.

This eliminates the need to rewrite any ZPL formats you already

have. Refer to the ZPL II Programming Guide for more

information on the differences between ZPL and ZPL II.

Power-Up and Head Close Parameters

MEDIA POWER UP

Media Power-Up: Press the RIGHT or LEFT BLACK OVAL key

to display other choices.

Default: Calibration

Selections: Feed, calibration, length, and no motion

This parameter establishes the action of the media when the

printer is turned on.

• Calibration: Determines the length of the label.

• Feed: Feeds the label to the first registration point.

• Length: Used in continuous mode to feed the last stored label

length.

• No Motion: Media does not move.

HEAD CLOSE

Head Close: Press the RIGHT or LEFT BLACK OVAL key to

display other choices.

Default: Calibration

Selections: Feed, calibration, length, no motion

Determines the action of the media after the printhead has been

opened and then closed.

• Calibration: Determines the length of the label.

• Feed: Feeds the label to the first registration point.

• Length: Used in continuous mode to feed the last stored label

length.

• No Motion: Media does not move.

1 2 ... 58 59 60 61 62 63 64 65 66 67 68 ... 115 116

No comments

Zebra XiIII Series User Manual Page 63