Zebra XiIII Series User Manual download pdf (Page 68)

60 Zebra XiIII-Series User’s Guide

* Real Time Clock option required

Press Display

Shows

Action/Explanation

LCD ADJUST

LCD Display Adjustment: Press the LEFT BLACK OVAL key to

decrease the value (reduce contrast), press the RIGHT BLACK

OVAL key to increase the value (increase contrast).

Range: 00 to 19

This parameter allows you to adjust the contrast of your display if

your display is difficult to read.

FORMAT

CONVERT

Format Convert: Press the RIGHT or LEFT BLACK OVAL key to

display other choices.

Default: None

Selections: None, 150 → 300, 150 → 600, 200 → 600, 300 → 600

Selects the bitmap scaling factor. The first number is the original

dots per inch (dpi) value; the second, the dpi to which you would like

to scale.

NOTE: Not applicable on all printers.

IDLE DISPLAY*

Idle Display: Press the RIGHT or LEFT BLACK OVAL key to

display other choices.

Default: Firmware version

Selections: mm/dd/yy (24 hour), mm/dd/yy (12 hour),

dd/mm/yy (24 hour), dd/mm/yy (12 hour)

This parameter selects the LCD display options for the real time

clock (if installed).

NOTE: If the default value is not selected, pressing either BLACK

OVAL key briefly displays the firmware version of the

printer.

RTC DATE*

RTC (Real Time Clock) Date: Press the LEFT BLACK OVAL key

to move to the next digit position, press the RIGHT BLACK OVAL

key to increase the value of the digit.

This parameter allows you to set the date following the convention

selected in “IDLE DISPLAY.”

RTC TIME*

RTC (Real Time Clock) Time: Press the LEFT BLACK OVAL key

to move to the next digit position, press the RIGHT BLACK OVAL

key to increase the value of the digit.

This parameter allows you to set the time following the convention

selected in “IDLE DISPLAY.”

1 2 ... 63 64 65 66 67 68 69 70 71 72 73 ... 115 116

Comments to this Manuals

No comments

Zebra XiIII Series User Manual Page 68

Comments to this Manuals

Related products and manuals for Label printers Zebra XiIII Series