Zebra XiIII Series User Manual download pdf (Page 62)

54 Zebra XiIII-Series User’s Guide

Selecting Prefix and Delimiter Characters

Prefix and delimiter characters are 2-digit hex values used within the ZPL/ZPL II formats sent to the printer.

The printer uses the last prefix and delimiter characters sent to it, whether from a ZPL II instruction or from

the front panel.

NOTE: DO NOT use the same hex value for the control, format, and delimiter character. The printer

needs to see different characters to function properly.

Press Display Shows Action/Explanation

CONTROL PREFIX

Control Prefix Character: Press the LEFT BLACK OVAL key

to move to the next digit position, press the RIGHT BLACK

OVAL key to increase the value of the digit.

Default: 7E (tilde - displayed as a black square)

Range: 00-FF

The printer looks for this 2-digit hex character to indicate the

start of a ZPL/ZPL II control instruction.

FORMAT PREFIX

Format Prefix Character: Press the LEFT BLACK OVAL key

to move to the next digit position, press the RIGHT BLACK

OVAL key to increase the value of the digit.

Default: 5E (caret)

Range: 00 - FF

The printer looks for this 2-digit hex character to indicate the

start of a ZPL/ZPL II format instruction.

DELIMITER CHAR

Delimiter Character: Press the LEFT BLACK OVAL key to

move to the next digit position, press the RIGHT BLACK OVAL

key to increase the value of the digit.

Default: 2C (comma)

Range: 00 - FF

The delimiter character is a 2-digit hex value used as a

parameter place marker in ZPL/ZPL II format instructions.

Refer to the ZPL II Programming Guide Volume I for more

information.

1 2 ... 57 58 59 60 61 62 63 64 65 66 67 ... 115 116

No comments

Zebra XiIII Series User Manual Page 62