Zebra XiIII Series User Manual download pdf (Page 101)

Zebra XiIII-Series User’s Guide 93

®®lcà

3ULQWHU,QWHUIDFH7HFKQLFDO,QIRUPDWLRQ

5656566HULDO'DWD3RUW

The connections for these standard interfaces are made through the

DB-25S connector on the rear panel. For all RS-232 input and output

signals, the printer follows both the Electronics Industries Association’s

(EIA) RS-232 specifications and the Consultative Committee for

International Telegraph and Telephone (CCITT) V.24 standard signal level

specifications.

The following table shows the pin configuration and function of the rear

panel serial data connector on the printer.

Pin No. Description

1 FG (frame ground) for cable shield

2 TXD (RS-232 transmit data) output from printer

3 RXD (RS-232 receive data) input to printer

4 RTS (RS-232 request to send) output from printer

6 DSR (data set ready) input to printer

7 SG (signal ground) for RS-232

9 +5 VDC source output (1 Amp maximum)

11 SGR (signal ground reference) for RS-422/RS-485

13 Data input B(-); RS-422/RS-485

14 Data output B(-); RS-422/RS-485

16 Data input A(+); RS-422/RS-485

19 Data output A(+); RS-422/RS-485

20 DTR (RS-232 data terminal ready) output from printer

NOTE: Pins 5, 8, 10, 12, 15, 17-18, 21-25 are unused and unterminated.

1 2 ... 96 97 98 99 100 101 102 103 104 105 106 ... 115 116

No comments

Zebra XiIII Series User Manual Page 101