Zebra XiIII Series User Manual download pdf (Page 64)

56 Zebra XiIII-Series User’s Guide

Label Positioning Parameters

Press Display Shows Action/Explanation

BACKFEED

Backfeed Sequence: Press the RIGHT or LEFT BLACK OVAL

key to display other choices.

Default: Default (90%)

Selections: Default, after, before, 10%, 20%, 30%, 40%, 50%,

60%, 70%, 80%, off

This parameter establishes when and how much label backfeed

occurs after a label is removed or cut in the peel-off, cutter, and

applicator modes. It has no effect in rewind or tear-off modes.

This parameter setting can be superseded by the ~JS instruction

when received as part of a label format (refer to the

ZPL II Programming Guide).

NOTE: The difference between the value entered and 100%

establishes how much backfeed occurs before the next

label is printed. For example, a value of 40 means that

40% of the backfeed takes place after the label is

removed or cut. The remaining 60% takes place before

the next label is printed. A value of “before” means that

all backfeed takes place before the next label is printed.

LABEL TOP

Adjusting Label Top Position: Press the RIGHT BLACK OVAL

key to increase the value, press the LEFT BLACK OVAL key to

decrease the value. The displayed value represents dots.

Default: +0

Range: –120 to +120 dot rows

The label top position adjusts the print position vertically on the

label. Positive numbers adjust the label top position further down

the label (away from the printhead), negative numbers adjust the

position up the label (toward the printhead).

LEFT POSITION

Adjusting Left Position: Press the LEFT BLACK OVAL key to

move the cursor, press the RIGHT BLACK OVAL key to change

between + and – and to increase the value of the digit. The

displayed value represents dots.

Default: 0000

Range: –9999 to +9999

NOTE: For a negative value, enter the value before changing to

the minus sign.

This parameter establishes how far from the left edge of a label

the format begins to print by adjusting horizontal positioning on

the label. Positive numbers adjust the printing to the left by the

number of dots selected, negative numbers shift printing to the

right.

1 2 ... 59 60 61 62 63 64 65 66 67 68 69 ... 115 116

Comments to this Manuals

No comments

Zebra XiIII Series User Manual Page 64

Comments to this Manuals

Related products and manuals for Label printers Zebra XiIII Series