Zebra A300 Specifications download pdf (Page 35)

2. Non-Continuous Media - This media has some type of physical

characteristic (i.e. a web, notch, hole, etc.) that can be detected

by the printer to separate the labels.

Media Type

The ^MT (Media Type) instruction selects the type of media being

used in the printer. There are two choices for this instruction:

1. Thermal Transfer Media - This media uses a high carbon

black or colored ribbon. The ink on the ribbon is bonded to the

media.

2. Direct Thermal Media - The media is heat sensitive and

requires no ribbon.

Media Darkness

The ^MD (Media Darkness) instruction adjusts the darkness relative

to the current darkness setting. The minimum value is -30 and the

maximum value is 30.

Examples for Using the ^MD Instruction

If the current value (value on configuration label) is 16, entering

the instruction ^MD-9 would decrease the value to 7.

If the current value (value on configuration label) is 1, entering

the instruction ^MD15 would increase the value to 16.

If the current value (value on configuration label) is 25, entering

the instruction ^MD10 would only increase the value to 30 since

that is the maximum value allowed.

NOTE: Each ^MD instruction is treated separately with respect to

the current value (value on configuration label).

For example, this is what would happen if two ^MD instructions were

received:

Assume the current value is 15. An ^MD-6 instruction is received

that changes the current value to 9. Another instruction, ^MD2,is

received. The current value is changed 17. The two ^MD instructions

were treated individually with respect to the current value of 15.

26 CHAPTER 3

ZPL II Printer Configuration

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 395 396

Kathi 19 Mar 2024 | 06:41:12

15 Undeniable Reasons To Love Tiktokpornstar tiktokpornstar

Jonah 04 Apr 2024 | 17:03:08

What Do You Need To Know To Be All Set To Top Pornstars Kayleigh Wanless top pornstars kayleigh Wanless

Zebra A300 Specifications Page 35