Set Head Resistance
The ^SR (Set Head Resistance) command lets you set the printhead
resistance via ZPL.
The format for the ^SR instruction is:
^SR#
where
^SR = Set Head Resistance
# = A Numeric Value up to 4 Digits Long Corresponding
to the Resistance Value You Want to Use.
Default value: Last permanently saved value
Range: 488 to 1175
NOTE: To avoid damaging the printhead, this value
should be less than or equal to the value shown on the
printhead you are using. Setting a higher value may
damage the printhead.
ZPL II COMMAND REFERENCE 321
C
O
M
M
A
N
D
R
E
F
E
R
E
N
C
E
^SR
15 Undeniable Reasons To Love Tiktokpornstar tiktokpornstar
What Do You Need To Know To Be All Set To Top Pornstars Kayleigh Wanless top pornstars kayleigh Wanless