Zebra XiIIIPlus User Manual download pdf (Page 77)

Front Panel Controls

Front Panel LCD

23063L-001 Rev. 2 6/21/2004 RXiIIIPlus User Guide 53

FORMAT

PREFIX

Format Prefix Character

The format prefix is a two-digit hex value used as a parameter place marker in ZPL/ZPL II

format instructions. The printer looks for this 2-digit hex character to indicate the start of a

ZPL/ZPL II format instruction. See the ZPL II Programming Guide Volume I for more

information.

Note • Do not use the same hex value for the control, format, and delimiter character. The

printer must see different characters to work properly.

1. Press the left oval to move to the next digit position.

2. Press the right oval to increase the value of the digit.

Default: 5E (caret)

Range: 00 to FF

DELIMITER

CHAR

Delimiter Character

The delimiter character is a 2-digit hex value used as a parameter place marker in

ZPL/ZPL II format instructions. See the ZPL II Programming Guide Volume I for more

information.

Note • Do not use the same hex value for the control, format, and delimiter character. The

printer must see different characters to work properly.

1. Press the left oval to move to the next digit position.

2. Press the right oval to increase the value of the digit.

Default: 2C (comma)

Range: 00 to FF

ZPL MODE

Selecting ZPL Mode

The printer remains in the selected mode until it is changed by this front panel instruction

or by using a ZPL/ZPL II command. The printer accepts label formats written in either

ZPL or ZPL II. This eliminates the need to rewrite any ZPL formats you already have. See

the ZPL II Programming Guide for more information on the differences between ZPL and

ZPL II.

• Press the right or left oval to display other choices.

Default: ZPL II

Selections: ZPL II, ZPL

Table 5 • Printer Parameters (Sheet 10 of 15)

Parameter Action/Explanation

1 2 ... 72 73 74 75 76 77 78 79 80 81 82 ... 151 152

No comments

Zebra XiIIIPlus User Manual Page 77