Zebra XiIIIPlus User Manual download pdf (Page 69)

Front Panel Controls

Front Panel LCD

23063L-001 Rev. 2 6/21/2004 RXiIIIPlus User Guide 45

PRINT MODE

Selecting Print Mode

Print mode settings tell the printer the method of label delivery that you wish to use. Be

sure to select a print mode that your hardware configuration supports because some of the

selections displayed are for optional printer features.

• Press either oval to display choices.

Default: Tear-Off

Selections: Tear-Off, Peel-Off, Cutter, Applicator, Rewind

Note • Only Tear-Off mode is supported.

MEDIA TYPE

Setting Media Type

This parameter tells the printer the type of media that you are using. Selecting continuous

media requires that you include a label length instruction in your label format (

^LLxxxx

if you are using ZPL or ZPL II).

When non-continuous media is selected, the printer feeds media to calculate label length

(the distance between two recognized registration points of the inter-label gap, webbing, or

alignment notch or hole).

• Press either oval to display choices.

Default: Non-Continuous

Selections: Continuous, Non-Continuous

SENSOR TYPE

Setting the Sensor Type

This parameter tells the printer whether you are using media with a web (gap/space

between labels, notch, or hole) to indicate the separations between labels or if you are

using media with a black mark printed on the back. If your media does not have black

marks for registration on the back, leave your printer at the default (web).

• Press either oval to display other choices.

Default: Web

Selections: Web, mark

Note • Only Web is supported.

PRINT METHOD

Selecting Print Method

The print method parameter tells the printer the method of printing that you wish to use:

direct thermal (no ribbon) or thermal transfer (using thermal transfer media and ribbon).

• Press either oval to display choices.

Default: Thermal transfer

Selections: Thermal transfer, direct thermal

Note • Selecting direct thermal when using thermal transfer media and ribbon creates a

printer error condition, but printing continues.

Table 5 • Printer Parameters (Sheet 2 of 15)

Parameter Action/Explanation

1 2 ... 64 65 66 67 68 69 70 71 72 73 74 ... 151 152

Comments to this Manuals

No comments

Zebra XiIIIPlus User Manual Page 69

Comments to this Manuals

Related products and manuals for Label printers Zebra XiIIIPlus