Zebra XiIIIPlus User Manual download pdf (Page 33)

Printer Setup

Unpack and Inspect the Printer

23063L-001 Rev. 2 6/21/2004 RXiIIIPlus User Guide 9

Unpack and Inspect the Printer

When you unpack the printer, save all packing materials. When the printer is out of the box,

raise the printer’s media door, and remove the power cord.

Inspect the printer for possible damage incurred during shipment. Check all exterior surfaces

for damage. Raise the media door, and inspect the media compartment for damage to

components.

Report Shipping Damage

If you discover shipping damage upon inspection:

• Immediately notify the shipping company of the damage, and file a damage report with

them. Zebra is not responsible for any damage incurred during shipment of the equipment

and does not repair this damage under warranty.

• Keep all packaging material for shipping company inspection.

• Notify your authorized Zebra reseller.

Store or Reship the Printer

If you are not placing the printer into immediate operation, repackage it using the original

packing materials. You may store the printer under the following conditions:

• Temperature: –40° to 140°F (–40° to 60°C)

• Relative humidity: 5% to 85% non-condensing

If you must ship the printer, remove any ribbon and media from the supply spools to avoid

damaging the printer. Carefully pack the printer into the original container or a suitable

alternate container to avoid damage during transit.

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 151 152

No comments

Zebra XiIIIPlus User Manual Page 33