Zebra XiIIIPlus User Manual download pdf (Page 34)

10 RXiIIIPlus User Guide 6/21/2004 23063L-001 Rev. 2

Printer Setup

Select a Site for the Printer

Consider the following when selecting an appropriate location for your printer.

Select a Surface

Select a solid, level surface of sufficient size and strength to accommodate the printer and

other equipment (such as a computer), if necessary. The choices include a table, countertop,

desk, or cart.

Provide Proper Operating Conditions

Because the printer was designed and is fabricated as an industrial-type unit, it functions

satisfactorily in a location that conforms to specified environmental and electrical conditions,

including a warehouse or factory floor. For more information on the required conditions, see

General Specifications on page 116.

Table 3 shows the temperature and relative humidity requirements for the printer when it is

operating.

Allow Proper Space

The printer should have enough space around it for you to be able to open the media door. To

allow for proper ventilation and cooling, leave open space on all sides of the printer.

Provide a Data Source

If the printer will be located away from the data source, the selected site must provide the

appropriate connections to that data source. For more information on the types of

communication interfaces, see Select a Communication Interface on page 12.

Table 3 • Operating Temperature and Humidity

Mode Temperature Relative Humidity

Thermal Transfer 41° to 104°F (5° to 40°C) 20 to 85% non-condensing

Direct Thermal 32° to 104°F (0° to 40°C) 20 to 85% non-condensing

Caution • Do not place any padding or cushioning material behind or under the printer

because this restricts air flow and could cause the printer to overheat.

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 151 152

No comments

Zebra XiIIIPlus User Manual Page 34