Mobile Printing Systems
CPCL Programming Manual
Section 14
Configuration/
Control
Commands
pg. 14-187
continued
wlan.roam.max_fail
type: getvar; setvar
This is the number of consecutive tx packet failures at which point the radio should start its roaming
algorithm. This is not supported by all radios.
getvar result Returns the number for the max_fail threshold.
getvar example
Description Get the current max_fail threshold value
Syntax ! U1 getvar “wlan.roam.max_fail”
Result “10”
setvar choices
2 to 75 inclusive
Default 10
setvar example
Description Set the max_fail threshold value to 30 packets
Syntax ! U1 setvar “wlan.roam.max_fail” “30”
Result Threshold set to 30 packets
Comments to this Manuals