Mobile Printing Systems
CPCL Programming Manual
Section 14
Configuration/
Control
Commands
pg. 14-176
continued
wlan.keep_alive.enable
type: getvar; setvar
This parameter controls the printer’s ability to send the link service access point (LSAP) packet to the
access point on a user-controllable interval. This feature is included to accommodate access points that
require a regular confirmation that wireless clients are still active.
getvar result The “wlan.keep_alive.enable” setting.
Example
Description Gets the printer to respond with the “wlan.keep_alive.enable”
setting.
Syntax ! U1 getvar “wlan.keep_alive.enable”
Result “on”
setvar choices
Values: “on” = turns on keep_alive; “off” = turns off keep_alive
Default “on”
Example
Description Sets the LSAP packet to the access point on a user-controllable
interval.
Syntax ! U1 setvar “wlan.keep_alive.enable” “on”
Comments to this Manuals