Mobile Printing Systems
CPCL Programming Manual
Section 14
Configuration/
Control
Commands
pg. 14-190
continued
RFID Parameters
Note: The following “rd.xxx” parameters are applicable only on Zebra mobile printers equipped with a RFID reader/encoder option.
More detailed information on RFID commands and parameters may be found in Zebra’s RFID
Programming Manual, available on the Zebra website.
rd.error.response
type: getvar
This command returns any active error message displayed on the printer’s LCD.
getvar result Returns any RFID error message.
Example 1 Description This example illustrates the result if no RFID
tag is present
Syntax ! U1 getvar “rfid.error.response”
Result “NO TAG FOUND”
Example 2 Description This example illustrates the result if a valid
RFID tag is present
Syntax ! U1 getvar “rfid.error.response”
Result “RFID OK”
Note: Refer to the Zebra RFID Programming Manual for complete information on error condition responses and further information
on RFID commands.
Comments to this Manuals