Zebra 110Xi4 User Manual

© 2010 ZIH Corp. All product names and numbers are Zebra trademarks, and Zebra and the Zebra logo are registered trademarks of ZIH Corp. All rights re

Load Media 10P1008806-002 Xi4™/RXi4™ Quick Reference Guide 3/8/102. Follow the instructions for your printer model to insert media into the printer.11

11Load Media 3/8/10 Xi4™/RXi4™ Quick Reference Guide P1008806-0023.c.Slide in the media supply guide until it touches the edge of the roll.c. Flip up

Load Media 12P1008806-002 Xi4™/RXi4™ Quick Reference Guide 3/8/104. Loosen the thumb screw (not visible from this angle) that is located on the bottom

13Load Media 3/8/10 Xi4™/RXi4™ Quick Reference Guide P1008806-0026. If your printer includes a media dancer assembly (1), thread the media under the m

Load Media 14P1008806-002 Xi4™/RXi4™ Quick Reference Guide 3/8/108. Align the media with the inner media guide (1). Slide in the outer media guide (2)

15Load Media 3/8/10 Xi4™/RXi4™ Quick Reference Guide P1008806-00210. Push down the printhead assembly (1), and then rotate the printhead-open lever (2

Load Ribbon 16P1008806-002 Xi4™/RXi4™ Quick Reference Guide 3/8/10Load RibbonUse the instructions in this section to load ribbon for use with thermal

17Load Ribbon 3/8/10 Xi4™/RXi4™ Quick Reference Guide P1008806-0024. Place the roll of ribbon on the ribbon supply spindle. Push the roll back as far

Load Ribbon 18P1008806-002 Xi4™/RXi4™ Quick Reference Guide 3/8/107. The ribbon path is slightly different for printers with ribbon dancer assemblies.

19Load Ribbon 3/8/10 Xi4™/RXi4™ Quick Reference Guide P1008806-0028. Push the ribbon leader forward until it passes under the printhead assembly (1),

Control Panel 2P1008806-002 Xi4™/RXi4™ Quick Reference Guide 3/8/10Control PanelThe control panel (Figure 2) indicates the printer’s operating status

Load Ribbon 20P1008806-002 Xi4™/RXi4™ Quick Reference Guide 3/8/109. Bring the ribbon leader over the upper ribbon roller (1) and then toward the ribb

21Load Ribbon 3/8/10 Xi4™/RXi4™ Quick Reference Guide P1008806-00212. Push down the printhead assembly (1), and then rotate the printhead-open lever (

Load Ribbon 22P1008806-002 Xi4™/RXi4™ Quick Reference Guide 3/8/10Remove Used RibbonRemove used ribbon from the ribbon take-up spindle each time you c

3Control Panel 3/8/10 Xi4™/RXi4™ Quick Reference Guide P1008806-00211CALIBRATE Calibrates the printer for the following:• Media length• Media type (co

Preparing the Printer for Use 4P1008806-002 Xi4™/RXi4™ Quick Reference Guide 3/8/10Preparing the Printer for UseAfter you have familiarized yourself w

5Preparing the Printer for Use 3/8/10 Xi4™/RXi4™ Quick Reference Guide P1008806-0025. Plug the male end of the A/C power cord into an appropriate powe

Preparing the Printer for Use 6P1008806-002 Xi4™/RXi4™ Quick Reference Guide 3/8/107. Raise the media door.8. Load media into the printer (see Load Me

7Preparing the Printer for Use 3/8/10 Xi4™/RXi4™ Quick Reference Guide P1008806-00211. To verify that the media and ribbon are loaded correctly, print

Preparing the Printer for Use 8P1008806-002 Xi4™/RXi4™ Quick Reference Guide 3/8/10c. Press PLUS (+) to select PRINT.If the media and ribbon are loade

9Load Media 3/8/10 Xi4™/RXi4™ Quick Reference Guide P1008806-002Load MediaUse the instructions in this section to load roll media in Tear-Off mode (Fi