Mobile Printing Systems
CPCL Programming Manual
Section 14
Configuration/
Control
Commands
pg. 14-96
continued
ip.dhcp.cid_all
type: getvar, setvar
This printer setting defines the entire client identifier (DHCP option 61) if the DHCP is enabled and “ip.
dhcp.cid_type” is set to “0” or “2”. The MAC address is used if the type is set to “1”.
getvar result Result is “printer” when setvar value is set to “printer”
Example
Description This command instructs the printer to respond with the client
identifier prefix and suffix.
Syntax ! U1 getvar “ip.dhcp.cid_all”
Result “”
setvar choices
A maximum length of 60 characters if the CID type is ASCII or 120 characters if
the CID type is hexadecimal.
Default “”
Example
Description This command instructs the printer to change the CID prefix and
suffix.
Syntax ! U1 setvar “ip.dhcp.cid_all” “value”
Comments to this Manuals