Mobile Printing Systems
CPCL Programming Manual
Section 14
Configuration/
Control
Commands
pg. 14-173
continued
wlan.ip.default_addr_enable
type: getvar; setvar
This parameter allows you to default the wireless print server’s IP address.
getvar result Status of default IP address feature.
Example
Description Gets the status of the setting of the wireless print server’s
default IP address feature.
Syntax ! U1 getvar “wlan.ip.default_addr_enable”
Result “on”
setvar choices
Values: “on” = enabled; “off” = disabled
Default “on”
Example
Description Sets the printer’s default address if no address is provided
through DHCP or BOOTP. If you do not assign an IP address
after 2 minutes, the 10/100 Internal PS defaults to IP address
192.168.254.254.
Syntax ! U1 setvar “wlan.ip.default_addr_enable” “on”
Comments to this Manuals