Zebra CPCL Specifications download pdf (Page 357)

100

101

Mobile Printing Systems

CPCL Programming Manual

Section 14

Configuration/

Control

Commands

pg. 14-131

continued

ip.snmp.create_mib

type: do

This parameter refers to creating a file of the printer’s MIB.

do parameters Filename (NOTE: The filename is up to eight characters in length with a three-

character extension)

Example

Description This command instructs the printer to create an SNMP MIB

file based in the current set/get parameters in the printer’s

application. The file will be stored on the printer’s file system

with the filename supplied as the parameter in the do command.

The MIB file can then be retrieved (via Label Vista, FTP, or other

wired /wireless connection to the printer) and passed onto

any SNMP-based utility to provide a means to monitor and

configure all the printer’s parameters via SNMP.

Syntax ! U1 do “ip.snmp.create_mib” “EXAMPLE1.MIB”

Result EXAMPLE1.MIB will be created in the printer’s file system with

the printer MIB information stored in it

ip.tcp.enable

type: getvar; setvar

This parameter refers to the TCP socket protocol.

getvar result Returns the TCP protocol status. (on or off)

Example

Description Instructs the printer to respond with the TCP setting

Syntax ! U1 getvar “ip.tcp.enable”

Result “on”

setvar choices

“on”, “off”

Default “on”

Example

Description Instructs the printer to enable the TCP protocol

Syntax ! U1 setvar “ip.tcp.enable” “on”

Result The TCP protocol will be turned on upon cycling the power or

issuing “device.reset”

1 2 ... 352 353 354 355 356 357 358 359 360 361 362 ... 496 497

Comments to this Manuals

No comments

Zebra CPCL Specifications Page 357

Comments to this Manuals

Related products and manuals for Print & Scan Zebra CPCL