Mobile Printing Systems
CPCL Programming Manual
Section 14
Configuration/
Control
Commands
pg. 14-117
continued
ip.pop3.poll
type: getvar; setvar
This parameter refers to the frequency (in seconds) that the printer will query a POP3 mailbox for new
mail. This only applies if the ip.pop3.enable is set to “on”.
NOTE: A poll value of less then thirty seconds is not recommended. The printer is unresponsive for several seconds when polling for
email depending on data transfer time from the server to the printer.
get var results This will return the poll frequency in seconds
Example
Description This command instructs the printer to respond with the POP3
poll frequency (in seconds)
Syntax ! U1 getvar “ip.pop3.poll”
Result “240”
set var choices
“0” through “65535” A value of “0” will cause the printer to query the POP3
mailbox once only on printer power up.
Default “240”
Example
Description This command instructs the printer to poll the POP3 mailbox
every four minutes
Syntax ! U1 setvar “ip.pop3.poll” “240”
Result This will set the pop3 polling frequency to 240 seconds (4
minutes)
Comments to this Manuals