Mobile Printing Systems
CPCL Programming Manual
Section 14
Configuration/
Control
Commands
pg. 14-71
continued
power.date_rst_used
type: getvar
Returns the date the pack is charged for the first time. This is a Zebra-generated value and is written to
the Zebra Data Block.
getvar result Returns the date of the battery pack’s first charge cycle.
Example Syntax !U1 getvar “power.date_first_used”
This parameter will only function on printers equipped with a Zebra “Smart Battery”.
power.design_capacity
type: getvar
Returns the theoretical capacity of a new battery pack in milliAmp-hour (mAh)
getvar result Returns the designed capacity of the battery pack in mAh.
Example Syntax !U1 getvar “power.design_capacity”
This parameter will only function on printers equipped with a Zebra “Smart Battery”.
power.design_voltage
type: getvar
Theoretical voltage of a new pack in milliVolts (mV).
getvar result Returns the designed voltage of the battery pack in mV.
Example Syntax !U1 getvar “power.design_voltage”
This parameter will only function on printers equipped with a Zebra “Smart Battery”.
Comments to this Manuals