Mobile Printing Systems
CPCL Programming Manual
Section 14
Configuration/
Control
Commands
pg. 14-58
continued
netmanage.avalanche.encryption_type
type: getvar ; setvar
This parameter sets and gets Network Management Encryption type to be used.
getvar result Returns the current Network Management Encryption type stored in the
printer.
Example
Description This example retrieves the device’s Network Management
Encryption type
Syntax ! U1 GETVAR “netmanage.avalanche.encryption_type”
Result “0”
setvar choices
0 – None; 1 – Limburger; 2 – AES128 (Not Supported Yet)
Default “0”.
Example
Description This example sets the device’s Network Management
Encryption type to Limburger
Syntax ! U1 SETVAR “netmanage.avalanche.encryption_type” “1”
Result None
netmanage.avalanche.interval
type: getvar; setvar
This parameter obtains or sets the Network Management Update Interval time stored in the printer.
Time is measured in milliseconds. (e.g. a setting of “2000” equals 2 seconds)
getvar result gets Network Management Update Interval
Example Syntax
! U1 GETVAR “netmanage.avalanche.interval”
setvar Default “0”
Example
Description Sets the Network Management Update Interval in msec.
Syntax
! U1 SETVAR “netmanage.avalanche.interval” “2000”
Result
Network Management Update Interval is set to 2 seconds
Comments to this Manuals