Mobile Printing Systems
CPCL Programming Manual
Section 14
Configuration/
Control
Commands
pg. 14-56
continued
Setting Avalanche Parameters with CPCL
You can configure your printer for Wavelink Avalanche using the following “get, set, do” parameters in
the CPCL programming language with the following commands:
netmanage.type
type: getvar; setvar
This parameter allows you to set the Network Management type for your printer. Using the SETVAR
command to select “avalanche” allows you to use the following “netmanage.avalanche” commands.
getvar result current Network Management setting
Example
Description Get current Network Management setting
Syntax ! U1 GETVAR “netmanage.type”
setvar options
“none”, “avalanche”
Default “none”
Example
Description Sets the Network Management type for your printer
syntax ! U1 SETVAR “netmanage.type” “avalanche”
Result Network Management type set to “avalanche”
netmanage.avalanche.agent_addr
type: getvar; setvar
This parameter obtains or changes the Network Management agent IP address.
getvar result obtains current Network Management IP address
Example
Description Get current Network Management IP address
Syntax
! U1 GETVAR “netmanage.avalanche.agent_addr”
setvar Default “0.0.0.0”
Example
Description Sets the Network Management Agent IP address
Syntax ! U1 SETVAR “netmanage.avalanche.agent_addr” “10.14.2.200”
Result Network Management agent IP address is set to “10.14.2.200”
Comments to this Manuals