Zebra CPCL Specifications download pdf (Page 235)

100

101

Mobile Printing Systems

CPCL Programming Manual

Section 14

Configuration/

Control

Commands

pg. 14-9

continued

bluetooth.authentication

type: getvar; setvar

This parameter sets Bluetooth authentication mode and works in combination with the “bluetooth.

bluetooth_pin” parameter. When authentication is set to “default” a PIN is required to connect to the

printer that is based on the friendly-name. Contact your printer supplier to obtain the algorithm that

generates this PIN.

When authentication is set to “setpin”, the PIN required to connect is set in the “bluetooth.bluetooth_pin”

parameter.

NOTE this parameter and the following “bluetooth.bluetooth_pin” parameter apply only when Bluetooth library versions 1.2.3 or

later are installed in the printer. Refer to “Getting Printer information” in Section 1 for information on obtaining installed printer

software versions

getvar result Current authentication mode setting, “off”, “default”, “setpin”.

Example

Description Get the current Bluetooth authentication mode

Syntax ! U1 getvar “bluetooth.authentication”

Result “off”

setvar choices

“off”, “default”, “setpin”

Default “off”

Example

Description Enable Bluetooth authentication

Syntax ! U1 setvar “bluetooth.authentication” “default”

Result

Printer will enable Bluetooth authentication with

user defined PIN set in the “bluetooth.bluetooth_

pin” parameter

1 2 ... 230 231 232 233 234 235 236 237 238 239 240 ... 496 497

Comments to this Manuals

No comments

Zebra CPCL Specifications Page 235

Comments to this Manuals

Related products and manuals for Print & Scan Zebra CPCL