Zebra CPCL Specifications download pdf (Page 107)

100

101

Mobile Printing Systems

CPCL Programming Manual

Section 8

Advanced

Commands

pg. 8-11

TENSION Commands

The tension commands are used to adjust the liner tension before and/or after printing a label by running

the rewind motor for a pre-specified length. This adjustment improves peeler performance of printers

equipped with a motorized rewind mechanism. The TENSION commands are ignored by printers not

equipped with a motorized rewind.

Format:

{command} {length}

where:

{command}: Choose one of the following:

PRE-TENSION: Perform tension adjustment prior to printing the label.

POST-TENSION: Perform tension adjustment after printing the label.

{length}: The unit length the rewind motor should to tighten the liner tension. The re-wind motor will

slip once tension is adjusted (it will not pull the stock out of adjustment for the next print cycle).

TENSION Command Example

In this example, the printer is instructed to run the rewind motor for 30 dot-lines, removing any slack in

the liner to adjust the liner tension prior to printing the label.

Input:

! 0 200 200 150 1

PRE-TENSION 30

TEXT 5 0 0 20 ADJUSTS TENSION

1 2 ... 102 103 104 105 106 107 108 109 110 111 112 ... 496 497

Comments to this Manuals

No comments

Zebra CPCL Specifications Page 107

Comments to this Manuals

Related products and manuals for Print & Scan Zebra CPCL