Zebra QLn420 User's Guide download pdf (Page 47)

QLn Series User Guide

WLAN Overview

QLn Series printers can be equipped with a radio using the

industry standard 802.11 protocols. They will have the FCC ID

number on the serial number label on the back of the unit.

• QLn Series Wireless Network Printers with the Zebra

802.11 WLAN radio module can be identified by the text

“Wireless Network Printer” on the serial number label on

the back of the printer.

• These printers allow communication as a node within a

wireless local area network (WLAN). Methods of estab-

lishing communications to the printer will vary with each

application.

General information on establishing WLAN communica-

tions can be found in the ”CPCL Programming Manual” which

is available on-line. More information and LAN configuration

utilities are included in Zebra’s Net Bridge™ program (version

2.8 and later). Zebra Setup Utilities (ZSU) can also be used to

configure WLAN communications settings. Both Net Bridge

and ZSU may be downloaded from the Zebra Web site.

Setting Up the Software

QLn Series printers use Zebra’s CPCL and ZPL Programming

languages which were designed for mobile printing ap-

plications. CPCL and ZPL are fully described in the ”CPCL

Programming Manual” and the “ZPL Programming Guide”

available on-line at

www.zebra.com/manuals

You can also use Designer Pro, Zebra’s Windows

based la-

bel creation program which uses a graphical interface to cre-

ate and edit labels in either language.

Refer to Appendix F for tips on downloading the Designer Pro appli-

cation from Zebra’s Web site.

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 102 103

No comments

Zebra QLn420 User's Guide Page 47