Zebra QLn420 User's Guide download pdf (Page 21)

QLn Series User Guide

Ethernet and Charging Cradles

The cradle is an expansion base intended for use with the

QLn Series printers. There is a four bay cradle (QLn-EC4) or

a single bay option (QLn-EC) for use with the QLn220 and

320, as shown on pages 23 and 24. There is also a single bay

Ethernet and charging option for the QLn420 (QLn420-EC) as

shown on page 24.

The QLn-EC/EC4 cradles provide charging power to the

docked printer as well as providing a standard 10/100Mb/S

Ethernet port for communication to the printer. The QLn420-

EC also provides charging power to the docked printer, as well

as a standard 10/100Mb/T Ethernet port for

communication to the printer. All cradles also supply battery

charging power to the docked printer and acts as a supple-

mentary power source for a functioning QLn printer.

All QLn Ethernet cradles feature two LED’s to indicate the

status of the cradle: Solid green to indicate when power is

provided to the input of the cradle; and blinking green to indi-

cate Ethernet activity.

The cradle allows the user to dock the printer easily and remove

it with the push of a button. The printer shall remain operable while

docked, i.e. display is viewable, charge LED status is viewable, and

printer controls and data entry are available. The printer will still print

while docked and the user shall be able to replace the media as well.

LED Status Indication

Solid Green Power On

Blinking Green Ethernet Activity

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 102 103

No comments

Zebra QLn420 User's Guide Page 21