Zebra QLn420 User's Guide download pdf (Page 34)

QLn Series User Guide

Indicates Bluetooth connection status. The icon will

blink to show that the printer is receiving label data via

Bluetooth, and is solid when link is established. This icon

appears only on printers with the Bluetooth wireless op-

tion installed.

Indicates that the printer is connected to a

radio network via 802.11 protocols. The antenna icon will

blink with no parentheses when looking for an access

point. One set of solid parentheses with blinking antenna

indicates WLAN is associated and attempting authentica-

tion. Two sets of solid parentheses and solid antenna in-

dicate the printer is successfully connected to the WLAN.

The icon and two parentheses will blink to show the print-

er is receiving printer data via WLAN. The four (4)

bars indicate the strength of the WLAN connec-

tion to the access point. These icons appear only with the

802.11 radio installed.

The Ethernet icon will blink when the printer is receiv-

ing label data via the Ethernet connection. It will not be

displayed on the status bar when the Ethernet is inactive.

This icon appears only when the Ethernet option is in-

stalled and the printer is docked in Ethernet cradle.

The Data icon indicates data being sent to the printer,

i.e. the icon will blink when there is a label data transmis-

sion via the serial or USB ports.

The Media Out icon will blink when there is no media

in the printer and will not blink when there is media in the

printer.

The Head Latch icon indicates if the media cover is

closed or not properly latched. It will appear unlocked and

blinking if open and will not appear if the cover is closed.

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 102 103

No comments

Zebra QLn420 User's Guide Page 34