Zebra QLn420 User's Guide download pdf (Page 65)

QLn Series User Guide

Label Specications

Parameter QLn320 QLn220 QLn420

Media Width

1.0 in. to 3.125 in. (25,4

to 79,4 mm)

.63 in to 2.18 in.

(16 mm to 55,37

mm)

2.0 in to 4.4 in.

(50,8 mm to

111,76 mm)

Max/Min

Label Length

0.5 in. minimum to 32

in. maximum

Same Same

Black Bar

Sensor to

Printhead

Burn Line

Distance.

0.625 in. (15,87 mm) +/-

0.025 in. (+/-0.635 mm)

0.53 in. (13,46

mm)

0.625 in. (15,87

mm) +/-0.025 in.

(+/-0.635 mm)

Label

Thickness

0.0023 in to 0.0065 in

(0,058 mm to 0,165 mm)

0.0023 in. to

0.0055 in.

(0,058mm to 0,140

mm)

0.0024 in. to

0.0075 in. (0,061

mm to 0,190 mm)

Max Tag

Thickness

0.0055 in. (0,152 mm)

maximum

Same as QLn320 0.0075 in. (0,190

mm) max

Max. Label

Roll dia.

2.6 in. (66,8 mm) O.D. 2.2 in. max (55,8

nn) O.D.

2.6 in, (66,8 mm)

O.D.

Label Inner

Core**

0.75 in. (19 mm) or 1.38

in (35,05 mm) minimum

dia. for linered

Same Same

1.38 in. (35,05 mm)

minimum dia. for

linerless media

Same Same

Black Mark

Location

The reflective media

black marks should be

centered on the media

roll.

Same Same

Black Mark

Dimensions

Minimum mark width:

0.5 in. (12,7 mm)

perpendicular to

inside edge of media,

centered within the

width of the roll.

Mark length: 0.12 in.

to 0.43 in. (3-11 mm)

parallel to inside edge

of media

Same Same

Use Zebra brand direct thermal media that is outside wound. Media may be reective (black mark)

sensing, or transmissive (gap) sensing, die-cut, continuous, or linerless.

For die-cut labels, use only full auto dies.

** QLn Series printers support coreless media which is 0.75 in. (19 mm) in inner diameter.

1 2 ... 60 61 62 63 64 65 66 67 68 69 70 ... 102 103

Comments to this Manuals

No comments

Zebra QLn420 User's Guide Page 65

Comments to this Manuals

Related products and manuals for Print & Scan Zebra QLn420