Zebra QLn420 User's Guide download pdf (Page 78)

QLn Series User Guide

Appendix D (continued)

PRINT MODE

REWIND

LEFT POSITION

REPRINT MODE

OFF

Select a print mode that is compatible

with your printer options.

If necessary, shift the print position hor-

izontally on the label. Positive numbers

move the left edge of the image toward the

center of the label by the number of dots

selected, while negative numbers move the

left edge of the image toward the left edge

of the label.

When reprint mode is enabled, you can

reprint the last label printed either by issu-

ing certain commands or by pressing the

LEFT ARROW on the keypad.

Set the maximum label length to a val-

ue that is at least 1.0 in. (25,4 mm) greater

than the actual label length plus the inter-

label gap. If yu set the value to one that is

smaller than the label length, the printer

assumes that continuous media is loaded,

and the printer cannot calibrate.

If necessary, change the language that

the printer displays.

Note: The selections for this parameter

are displayed in the actual languages to

make it easier to nd one that you are

able to read.

LABEL LENGTH MAX

LANGUAGE

ENGLISH

1 2 ... 73 74 75 76 77 78 79 80 81 82 83 ... 102 103

No comments

Zebra QLn420 User's Guide Page 78