Zebra QLn420 User's Guide download pdf (Page 31)

QLn Series User Guide

• To disengage the peeler bail, press the peeler release

while pressing straight down on the peeler lever. This

will disengage the peeler bail and return it to its original

home position.

Note: Before disengaging peeler, be sure there are no peeled labels

present on peeler bail. This could cause a label jam if you were to

disengage with peeled label present

Operator Controls

The QLn Series printers come equipped with a keypad con-

trol panel and LCD graphical user interface. The standard

control panel is illustrated in Figure 17, 17a, and 18. The LCD

interface allows easy display and selection of many printer

functions as detailed on following pages.

Standard Control Panel

The standard control panel has multiple control buttons and two

multipurpose indicators.

• The Power Button turns the printer on and off.

• The Media Feed Button advances a length of media which is de-

termined by the type of media being used. Label media will be

advanced to the next gap or bar sense marker. Journal (plain)

media will be advanced by a length determined by the printer’s

software.

• The LED Charge Indicator shows solid Yellow when charg-

ing, solid Green when fully charged, and is turned off

when there’s a fault condition and the printer is plugged

in.

• Four Way Navigation Buttons allow the user to scroll between

functions on the LCD user space. (The Navigation Buttons do

not apply to the Status Bar and Navigation Bar.)

• Enter Button allows the user to select the desired function high-

lighted on the LCD interface and is indicated by the word “OK”.

• Two software defined function keys allow the user to select a

function listed on the navigation bar.

LCD Control Panel

continued

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 102 103

No comments

Zebra QLn420 User's Guide Page 31