29
QLn Series User Guide
Loading Media in Peel-o Mode (QLn320 & QLn220)
• If you plan to use the printer in the peel-off mode, peel a few la-
bels off of the media and load the media as previously described.
• Push the peeler lever forward to release the peeler bail
into the “up” position as shown at “3” and “4” in Figure
15.
• Close the media cover to lock the peeler bail in place. The media
will feed between the peeler bail and platen.
Peeler Lever
Figure 15: Activating Peeler Bar (QLn320 Shown)
• Turn on the printer or press the Feed button on the front of the
printer if the printer is already on.
The printer will advance the media to the next label, if printing
labels. If you are printing on journal media, the printer will ad-
vance a short strip of media.
To disengage the peeler bail, first open the media cover as previ-
ously described. The peeler bail will automatically return to the
Up position.
Press straight down on the peeler bail to lock it in place in its origi-
nal home position.
Latch Release
Lever
4
Peeler Bail
Pull up and ip down if
using media in the peel-
o mode.
Comments to this Manuals