28 105SL User Guide 6/4/2004 11342L Rev. 8
Printer Operation
Removing the Label Liner
Removing the Label Liner
Because the rewind spindle holds the liner from a standard-size media roll, perform this
procedure whenever yo u chan ge the media. You do not need to turn off the printer to perform
this procedure.
To remove the liner from the rewind spindle, follow these steps:
1. Unwind approximately 36 in . (915 mm) of liner from the rewind spin dl e. Cut it off at the
spindle.
2. Pull out the hook . Slide the liner off of the rewin d spindle and discard .
3. Wind the media around the rewind spindle once or twice and reinstall the hook. Continue
winding to remove any sl ack in the media.
Comments to this Manuals