Zebra 105SL User Manual download pdf (Page 46)

22 105SL User Guide 6/4/2004 11342L Rev. 8

Printer Operation

Roll Media Loading

The different print modes affect the way th at me dia is loaded in the printer.

• Tear-O ff mode: Labels are produced in strips.

• Peel-Off mode: Labels are dispensed and peeled from the liner as needed.

• Rewind mode: Labels are rewound internally.

• Cutter mode: Labels are printed and individ uall y cut.

Tear-Off Mode

Refer to Figure 15.

To load media in Tear-Off mode, complete these steps:

1. Open the p r i nthead.

2. Slide the media guide and media supply guide as far from the printer frame as possible.

3. Load media as shown.

4. Slide in the media guide and media supply guide so they just to uch, but do not restrict, the

edge of the roll.

5. Close the printhea d .

Figure 15 • Tear-Off Mode Loading

Note • A calibration must be performed with all loading modes during the following

circumstances if the prin ter is set to Feed or No Mo ti on at power up or head close:

• When media and ribbon (if used) are first installed in the printer.

• When media or ri bb on is cha ng ed to a different type.

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 129 130

No comments

Zebra 105SL User Manual Page 46