Zebra 105SL User Manual download pdf (Page 29)

Introduction

Operator Controls

11342L Re v. 8 6/4/2004 105SL User Guide 5

Front Panel Lights

Note • If two operating conditions occur simultaneously (for example, one that causes a light

to be on constantly and one t hat causes the same light to flash), the ligh t flashes.

Table 2: Front Panel Lights

Light Status Indication

POWER Off The printer is off or power is not applied.

On The printer is on.

TAKE LABEL Off Normal operation.

Flashing (Peel-Off Mode only.) The label is available. Printing is

paused until the label is removed.

ERROR Off Normal operation—no printer errors.

Flashing A printer error exists. Check the LCD for more information.

CHECK RIBBON Off Normal operation—ribbon (if used) is properly loaded.

On Printing is pau sed, the LCD display s a warning message, and

the PAUSE light is on.

• If the printer is in Direct Thermal Mode: ribbon is loaded.

• If the printer is in Thermal Transfer Mode: no ribbon is

loaded.

PA PER OUT Off Normal operation—media is properly loade d.

On No media is under the media sensor. Printing is paused, the

LCD shows an error message, and the PAUSE light is on.

PA USE Off Normal operation.

On The printer has st opped all printing operations. Either PAUSE

was pressed, a pause command was included in th e label

format, the online verifier detected an error, or a printer error

was detected. Refer to the LCD for more information.

DATA Off Normal operation. No data being received or processed.

On Data processing or printing is taking place. No data is being

received.

Flashing The printer is receiving dat a from or sending status

information to the host computer. Flashing slows when the

printer cannot accept more data, but returns to normal once

data is again being received.

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 129 130

No comments

Zebra 105SL User Manual Page 29