Zebra TTP2130 Specifications Page 86

  • Download
  • Add to my manuals
  • Print
  • Page
    / 132
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 85
Default Parameter Settings
Print Setup
86
P1003640-002 TTP 2100 Technical Manual 09/28/2009
Print Setup
A long burn time gives darker print. On insensitive paper types you may have to increase the
burn time to get an acceptable print quality.
The main reason to decrease the print speed is to enhance print quality, and to reduce average
current consumption.
Controls how the printhead burns the pixels. Four burn pulses give a more even blackness
over the width of the paper and a lower peak current consumption. Two burn pulses give faster
printouts at high burn times. At normal burn times the speed is the same for both settings.;
Selects which font attributes are selected at power ON or after reset. Font attributes bold,
height and width are stored in this parameter.
7
9Default
Burn Time
DRV
1 Min
15 Max
8
19 Default
Max Print Speed
DRV
1 Min
19 Max
n
12345678910111213141516171819
mm/s
47 48 49 50 51 52 53 55 57 61 65 70 77 86 96 107 123 136 150
Note • Settings below 15 result in printer chassis resonance causing increased noise and
deteriorated print quality.
10
3Default
Printhead Pulse Control
3 Min
7Max
<ESC>&P<10><3> 2 burn pulses
<ESC>&P<10><7> 4 burn pulses
Caution • Values 3 and 7 are the only allowed settings. Do not set anything else!
12
0Default
Font Attributes
0 Min
255 Max
bits 0-3 Height Multiplier
bits 4-6 Width Multiplier
bit 7 Bold enable
Page view 85
1 2 ... 81 82 83 84 85 86 87 88 89 90 91 ... 131 132

Comments to this Manuals

No comments