Zebra S400 User's Guide download pdf (Page 62)

Operations

Adjust Printhead Pressure

79695L-001 Rev. A ZM400/ZM600 User Guide 3/27/07

2. If necessary, adjust the pressure adjustment dials as follows:

Table 11 • ZM600 Printhead Pressure

Media Width

Inside Dial Outside Dial

2 in. (50 mm) 6 1

3 in. (75 mm) 6 2

4 in. (100 mm) 7 3

5 in. (125 mm) 7 4

5.5 in. and up (140 mm and up) 6 6

If the media... Then...

Requires higher pressure to

print well

Increase both dials one position.

Shifts left while printing Increase the outside dial setting one position, or

decrease the inside dial setting one position.

Shifts right while printing Increase the inside dial setting one position, or

decrease the outside dial setting one position.

Prints too lightly on the left side

of the label.

Increase the inside dial setting one position.

Prints too lightly on the right

side of the label.

Increase the outside dial setting one position.

1 2 ... 57 58 59 60 61 62 63 64 65 66 67 ... 145 146

No comments

Zebra S400 User's Guide Page 62