Zebra S400 User's Guide download pdf (Page 123)

115

Troubleshooting

Printer Diagnostics

3/27/07 ZM400/ZM600 User Guide 79695L-001 Rev. A

PAUSE Self Test

This self test can be used to provide the test labels required when making adjustments to the

printer’s mechanical assemblies or to determine if any printhead elements are not working.

Figure 19 shows a sample printout.

To perform a PAUSE self test, complete these steps:

1. Turn off (O) the printer.

2. Press and hold PAUSE while turning on (I) the printer. Hold PAUSE until the first control

panel light turns off.

• The initial self test prints 15 labels at the printer’s slowest speed, and then

automatically pauses the printer. Each time

PAUSE is pressed, an additional 15 labels

print. Figure 19 shows a sample of the labels.

Figure 19 • PAUSE Test Label

• While the printer is paused, pressing

CANCEL alters the self test. Each time PAUSE is

pressed, 15 labels print at 6 in. (152 mm) per second.

• While the printer is paused, pressing

CANCEL again alters the self test a second time.

Each time

PAUSE is pressed, 50 labels print at the printer’s slowest speed

• While the printer is paused, pressing

CANCEL again alters the self test a third time.

Each time

PAUSE is pressed, 50 labels print at 6 in. (152 mm) per second.

• While the printer is paused, pressing

CANCEL again alters the self test a fourth time.

Each time

PAUSE is pressed, 15 labels print at the printer’s maximum speed.

• To exit this self test at any time, press and hold

CANCEL.

1 2 ... 118 119 120 121 122 123 124 125 126 127 128 ... 145 146

No comments

Zebra S400 User's Guide Page 123