16 ZebraNet 10/100 Print Server User and Reference Guide
Getting Started
Assigning an IP Address
$VVLJQLQJDQ,3$GGUHVV
Before you can begin working with 10⁄100 PS, you must get or assign an IP address
for the 10⁄100 PS device.
:LWK'\QDPLF+RVW&RQILJXUDWLRQ3URWRFRO'+&3
If your network uses DHCP, your 10⁄100 PS device is assigned a temporary IP
address. This is important to know, because you have the option to make the
temporary IP address the permanent IP address.
:LWKRXW'+&3
If your network does not use a dynamic IP addressing system (such as DHCP), you
need to set a permanent IP address of the 10⁄100 PS device.
=HEUD1HW9LHZ
ZebraNet View is the Windows-based print server management and configuration
utility that came with your 10⁄100 PS.
Important • Throughout the step sequence in this chapter, there are some features
that require the default User ID and/or default password. If you are prompted, these
are the defaults:
User ID: admin
Password: 1234
Note • Check with your Network Administrator to see whether your network uses
DHCP.
Important • The remaining sections are dependent on the successful installation of
ZebraNet Utilities, which you should have completed on page 56.
Comments to this Manuals